DAVIS Anemometer Manual do Utilizador descarregar pdf

Standard Anemometer

Installation Manual

The anemometer measures and displays wind-related conditions such as wind

speed, wind direction, wind run, wind chill, and the temperature-humidity-

sun-wind index.

Components

The anemometer includes the components listed below. Be sure you have all

listed components before continuing. Assess your installation and make sure

you have all necessary parts, tools, and materials pictured below before you

begin.

Wind Cups

nemometer

Base

Anemometer Arm

with 40 feet (12.2 meters)

of cable

Wind Vane

Hardware

The hardware kit contains the items

most commonly needed for the

installation of the anemometer.

Which items you use from the kit

depend on where you install your

unit. You may need to adapt or

purchase additional hardware to fit

your individual requirements.

Tools and Materials Needed

You will need the following tools

and m

aterials to install your

anemometer:

• Cable Clips or Weather-Resistant Cable Ties

Note: Make sure the clips or ties you use to secure the anemometer cable have screw holes or other

means for mounting the cable. Do not use metal staples to secure the cables.

1 2 3 4 5 6 7 8

Resumo do Conteúdo

Página 1 - Standard Anemometer

1Standard AnemometerInstallation ManualThe anemometer measures and displays wind-related conditions such as wind speed, wind direction, wind run, wind

Página 2 - Assembling the Anemometer

Testing the Anemometer2• Stainless Steel Hose Clamps• Small Screwdrivers• Adjustable Wrench• Hand-Held Compass or Local Area MapTesting the Anemometer

Página 3 - Attaching the Wind Cups

Choosing the Best Anemometer Location3Attaching the Wind CupsBefore installing the anemometer, attach the wind cups. Wait until you have installed the

Página 4 - Installing the Anemometer

Installing the Anemometer4default, the wind vane reports the correct wind direction if the anemometer arm points true north.To ensure correct orientat

Página 5

Installing the Anemometer5On a metal pipe with outside diameter greater than 11/4 inch (32 mm):1. Use two stainless steel hose clamps to attach the mo

Página 6 - Maintenance

Maintenance6Installing the wind vane1. Slide the wind vane down onto the shaft as far as it will go. (Because of the shape of the shaft, the vane will

Página 7 - Troubleshooting

Troubleshooting7TroubleshootingWhile your anemometer is designed to provide years of trouble-free operation, occasionally problems may arise. If you a

Página 8 - Specifications

Standard Anemometer Installation ManualProduct Number: 7911Document Part Number: 7395.032 Rev E (February 8, 2013)© Davis Instruments Corp. 2013. All