Davis WeatherLink Mac OS X Getting Started Guide Manual do Utilizador descarregar pdf (Página 5)

Remote Modem Connection Notes

8. Insert the USB - Mini B connector on the USB connector of the USB data

logger. The connection between the console and the computer can be

extended up to 16’ (5 m) using a USB-to-USB connector cable.

9. Check the Baud rate settings on the console.

• Enter the console Setup Mode by pressing and holding DONE key,

then pressing the DOWN arrow (-) key on your console.

• Use DONE and BAR to scroll to the Baud Rate screen. The Baud Rate

setting here on the console must be same as that set in the Weather-

Link software.

• Use the UP (+) and DOWN arrow (-) keys to change the baud rate set-

ting, if needed.

• Press and hold DONE to exit Setup Mode.

• The default setting is 19200 Baud.

Remote Modem Connection Notes

When accessing a remote modem connection, WeatherLink automatically

dials the station and console whenever an action has been performed in the

software that requires it to talk to the station.

While connected to a remote station, an On-Line icon displays in the tool-

bar. This icon indicates that WeatherLink has established a connection with

the remote console and weather station. Select the On-Line icon from the

Vantage Pro Console

Battery Cover

Data

Logger

USB

port

USB-mini B

Cable

Battery Cover

Vantage Vue Console

Typical Local Connection for Vantage Pro, Vantage Pro2 and Vantage Vue

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Davis WeatherLink Mac OS X Getting Started Guide Manual do Utilizador Página 5