DAVIS Wireless Repeater 7624 Manual

Consulte online ou descarregue Manual para Routers DAVIS Wireless Repeater 7624. DAVIS Wireless Repeater 7624 Product manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 0
Product # 7624 & 7625
W
IRELESS
R
EPEATER
WITH SOLAR OR AC-POWER
The Wireless Repeater receives data from any DavisTalk™-compatible trans-
mitter and re-transmits it to any DavisTalk-compatible receiver. The repeater
extends the transmission range and improves reception between the transmit-
ter and the receiver.
Each repeater has a transmitting and receiving range of up to 400' (120 m)
depending upon the terrain. The repeater can listen for up to eight different
transmitter signals and can pass those signals on to another repeater or to any
number of receivers.
Note: The Wireless Repeater operates on a low power frequency that does not require an FCC
license.
The repeater allows you to put together your weather system in a number of
different ways. The most common setup is to install the repeater between a
transmitter and a receiver to improve reception. You can also install a chain of
up to eight repeaters to carry the transmitter’s signal over a longer distance, or
around obstacles. Or, you can establish a network of weather stations by linking
the chain of repeaters to up to eight different wireless stations.
This manual describes three different setup options in separate sections based
on how many repeaters and transmitters you plan to install:
The first section, “Single Transmitter, Single Repeater Installation” on
page 3, discusses the most common and simplest installation—that of
one transmitter, one repeater and one or more receivers.
The second section, “Daisy-Chain Installation (Multiple Repeaters)” on
page 10, discusses daisy-chaining up to eight repeaters in succession to
increase the range between a single transmitter and one or more receiv-
ers.
And the third section, “Network Installation (Multiple Transmitters)” on
page 12, discusses setting up a complex network of transmitters, repeat-
ers, and receivers.
These setup instructions apply whether you have a solar-powered or an
AC-powered repeater.
Vista de página 0
1 2 3 4 5 6 ... 15 16

Resumo do Conteúdo

Página 1 - SOLAR OR AC-POWER

Product # 7624 & 7625WIRELESS REPEATERWITH SOLAR OR AC-POWERThe Wireless Repeater receives data from any DavisTalk™-compatible trans-mitter and re

Página 2 - Tools and Materials

Page 10 Wireless RepeaterAdvanced InstallationsDaisy-Chain Installation (Multiple Repeaters)To transmit data up to one and a half miles (two and a hal

Página 3 - Test LEDs

Advanced Installations Page 11So, for example, the second (B) repeater’s DIP switches will be set to OFF, OFF, ON, while the third (C) will be set to

Página 4

Page 12 Wireless RepeaterNetwork Installation (Multiple Transmitters)If you have two or more transmitters in your network, follow the instructions as

Página 5

Advanced Installations Page 13✦Combo Network — Multiple Transmitters AND Multiple RepeatersA combo network can have any combinations of the multiple t

Página 6 - DIP Switches

Page 14 Wireless Repeater5. Turn off the “farthest” transmitter and then add the second farthest trans-mitter (and its receiver) to your network. Chec

Página 7

Troubleshooting Page 158. Take all transmitters, repeaters, and receivers out of test mode.Consult your installation manuals to find out how to take th

Página 8 - Mounting the Repeater

Product Numbers: 7624 & 7625Davis Instruments Part Number: 7395.105 Wireless Repeater with Solar or AC-PowerRev. E (September 9, 2003)This produc

Página 9

Page 2 Wireless RepeaterComponentsThe Wireless Repeater includes the following components. Please be sure you have everything you need for either the

Página 10 - Advanced Installations

Single Transmitter, Single Repeater Installation Page 3Single Transmitter, Single Repeater InstallationIf you have just one DavisTalk transmitter and

Página 11 - (default)

Page 4 Wireless RepeaterNote: If you’re using only one transmitter, one repeater, and one console, all three devices are set at the factory to broadca

Página 12 - Transmitter

Single Transmitter, Single Repeater Installation Page 5Testing Proposed LocationsTest your proposed transmitter, repeater and receiver locations to en

Página 13 - Repeaters

Page 6 Wireless Repeater✦Solar-Power ModelPlug the power cord from the battery to the jack marked POWER as shown below. Watch for the LEDs to light, (

Página 14

Single Transmitter, Single Repeater Installation Page 74. When you find a location that works, switch all three units out of test mode.If the transmitt

Página 15 - Troubleshooting

Page 8 Wireless RepeaterMounting the RepeaterOnce you determine that your chosen location transmits and receives the sig-nal, continue with the instal

Página 16 - Specifications

Mounting the Repeater Page 9Mounting the Solar-Powered Repeater1. Mount the shelter against a wall or post, or on a pipe. CAUTION: Remember to face th

Comentários a estes Manuais

Sem comentários